Precision worldwide

Startseite suchen Sitemap Kontakt

The Internal-Micrometer DIGITAL

shock resistant, water resistant, inch / mm INC / ABS, high-contrast display, optional wireless interface

MICROTEST® high-precision mechanics are refined with high-tech electronics. As a result of intensive development it has now been possible to implement a digital module that enables even higher accuracies to be achieved than with analogue equipment. The measurement shaft, supported in two sets of ball bearings, carries a highly accurate sensor that generates 10,000 increments per rotation. The recording of values measured in 100 nm steps improves the accuracy significantly. The housing is manufactured from a glass fiber reinforced plastic and is fitted with cooling water-resistant seals at all entry points. The module meets the IP 67 standard of protection, is impact resistant, and can also withstand complete immersion in a swarf trough.

A high contrast display with large numbers makes readout easier, even under difficult lighting conditions. All important functions can be selected directly via a button.

For data transfer a radio module is available as an option, with a factory hall range of ~100m, or alternatively a cable can be used.
Measurement analyzers, interfaces to all well-known manufacturers, and other accessories, complete the system solution.

Digital Internal Micrometer Standard Sets with Plastic Cases:

IES003 Ø 30–90 mm : 3 MICROTEST-Internal-Micrometer Ø 30–90

mm, 2 control rings Ø 40/90 mm, 1 Extension 200 mm, 1 screwdriver.

 

IES004 Ø 90–400 mm : 3 MICROTEST-Internal-Micrometer Ø 90–400

mm, 2 control rings Ø 90/240 mm, 1 Extension 200 mm, 1 tool set.

 

IES005 Ø 30–400 mm : 6 MICROTEST-Internal-Micrometer Ø 30–400

mm, 3 control rings Ø 40/90/240 mm, 1 Extension 200 mm, 2 tool sets.

 

IES007 Ø 50–315 mm : 4 MICROTEST-Internal-Micrometer Ø 50–

315 mm, 2 control rings Ø 75/185 mm, 1 Extension 200 mm, 1 tool set.

 

 

Digital ECO-Line Internal Micrometer Sets with exchangeable Measuring Heads in a Plastic Case:

ECO S3 Ø 30–90 mm : 3 MICROTEST ECO-Line-Internal-Micrometer Ø 30–90 mm,

2 control rings ECO-Line Ø 40/60 mm, 1 Display ECO-Line, 1 Extension 100 mm, 1 tool set.

 

ECO S4 Ø 90–400 mm : 3 MICROTEST ECO-Line-Internal-Micrometer Ø 90–400 mm,

2 control rings ECO-Line Ø 90/240 mm, 1 Display ECO-Line, 1 Extension 100 mm, 1 tool set.

 

ECO S5 Ø 30–400 mm : 6 MICROTEST ECO-Line-Internal-Micrometer Ø 30–400 mm,

3 control rings ECO-Line Ø 40/90/240 mm, 1 Display ECO-Line, 1 Extension 100 mm, 1 tool set.

 

ECO S7 Ø 50–315 mm : 4 MICROTEST ECO-Line-Internal-Micrometer Ø 50–315 mm,

2 control rings ECO-Line Ø 75/185 mm, 1 Display ECO-Line, 1 Extension 100 mm, 1 tool set.

Microtest AG
Precision Measuring Instruments

Sihleggstrasse 23
CH-8832 Wollerau
Switzerland

Tel.: +41 (0)44 723 12 76
Fax: +41 (0)44 723 12 71

info@microtest.ch

copyright © 2017 Microtest AG · Realisation · to top